Logo Secure Login  
 
     
         

 

 

Technology > Digi-Touch® Network

Overview

Digi-Touch™ improves the functionality of Lumisys panels and Qwik-Kits by providing the capability of networking digital switches over a single twisted pair of wires. This twisted pair network is the Lumisys Digi-Touch Network.

The idea is that we can put more devices on the digital subnet and serve them with a higher throughput all while maintaining soft configurability as an integral part of the Building Automation System. With Digi-Touch on an Lx5 platform, installers, energy managers and users experience a dramatic improvement over standard switching and occupancy methods.

Overview Animation

Eliminate Low Voltage Home-Runs

Significantly less wire needs to be run and maintained when utilizing a Digi-Touch Network as compared to a traditional wiring process; thereby reducing installation costs by eliminating the need for multiple low voltage and line voltage home run wiring.

PDF Data Sheet for Digi-Touch Switches and Input Modules

Digi-Touch Digital Switches

  • Provide pushbutton for on and off control of 2 lighting groups
  • Can be one of many switches controlling the same lighting group.
  • Mount in standard single or multiple gang wall switch box.
  • Fit industry standard Decora® opening.
  • Contain an integral bi-color LED that illuminates red when the associated lighting group is on and green when off.
  • Provide a removable clear cap on the pushbutton for placement of a descriptor to identify the area controlled.
  • A maximum of 30 uniquely addressable Digital Switches can be connected on a Digi-Touch Network (actual number may vary depending on the network wire gauge and voltage drop)
  • Dip switch sets the lighting group it controls.
  • Have removable terminal blocks to simplify installation.

    ..
Digi-Touch  
   
   
   
 

Typical Wiring

Digi-Touch Digital Switches - Typical Wiring

Digi-Touch Input Module

  • Digi-Touch Input ModuleMake a standard switch into an addressable one!
  • Make a standard occupancy sensor into an addressable one!
  • Almost any type of “2-wire” contact closure
    • Wet/dry
    • Momentary/maintained
  • Tested and approved Occupancy Sensors:
    • Hubble ATP1500CRP
    • Novitas 01-BAS300
    • Sensor Switch CM9
    • Sensor Switch CM9PDT
    • Watt Stopper CI-200
    • others, check with your account representative

Typical Wiring

Digi-Touch Input Module - Typical Wiring

Address Selection Dip Switch Input Type Selection Dip Switch Status and Trouble Shooting LEDs
     
   
 
 
Site requires the free Get Adobe Flash Player.....Get Acrobat Reader.....Get the free DWG (AutoCAD) viewer from Discreet.com.......................................................© Lumisys. All rights reserved

 

 

Address Selection Dip Switch Input Type Selection Dip Switch Status and Trouble Shooting LEDs MAXIOM Panel - All MAXIOM Panels are Digi-Touch Enabled Digi-Touch Annunicated Digital Switches Digi-Touch Input Module